While window films offer many benefits to vehicles, homes, and commercial buildings, potential problems can arise during use. Window tint issues occur more often in DIY jobs, many people try to apply window tint themselves to save money, but they tend to have more problems in the long run. Therefore, professional installation is highly recommended by most window tint services.
These are some common DIY window tinting issues:
Peeling
Peeling after a few years is typical, but when the window film peels off shortly after application, it’s a sign that it wasn’t installed properly. After the glue has hardened from exposure, the window film usually slips off. The tint may peel off slightly or so much that the entire film peels off.
If you tried to apply the tint yourself, you might have used the wrong or weak adhesives for the tint to stick. Diluted glue does not support the film properly. Instead, it slides off the glass.
On the other hand, you might try to install the film when the car is in poor condition. For example, if your car’s surface is wet, the color won’t stick to the adhesive properly. Overheated windows may also resist adhesives.
When you get professionally installed window film, it reduces the chance of any peeling happening.
Bubbling
If a window film develops bubbles right after installation, it’s probably a sign of an issue. In many cases, air bubbles form from contact with dirt. If you miss a few spots of dirt before starting the installation, it can cause the tint to get trapped in the surrounding air and the tint to swell.
Air bubbles detract from the appearance of the window film and can cause distraction while driving. Bubbles inhibit the light and can cause it to distort, affecting your ability to drive. It’s best to seek the help of a professional installer to avoid them appearing in your tint.
Discoloring
Another common DIY window tinting problem is discoloration. Window film is constantly exposed to UV light and sunlight, and the heat can put a lot of stress on the material. Cheaper dyes begin to fade quickly and may develop a purple hue. If your tint starts to appear purple, the dye is either incorrect or of poor quality.
Shades can also become cloudy or hazy if used incorrectly. This is usually due to the wet surface of the car during installation. The water gets trapped under the tint and turns into steam, obscuring the rest of the film. In these cases, you should seek professional help – cloudy surfaces can prevent you from seeing the road properly and could lead to an accident.
Gapping
If you try to apply the window tint yourself, you may find small gaps or uneven spaces after installation. These gaps are frequent in DIY installations. Look for uneven lines around window edges or doorknobs, which are often missed.
You may have to remove all tint and start over to fix those gaps. This is usually more expensive than seeking an expert application at the first. Professional tint installers typically use computerized templates to ensure a thorough administration. It is best to contact a professional for the most thorough window film application.
Temperature Problems
One of the biggest advantages of window tint is temperature regulation. After installation, your car or building naturally adjusts for excess heat and cold. However, if you find your car or room feels stuffy or cold a few days after applying, that means the job may not have been done properly. The film may be blocking healthy air flow, which is doing more harm than good.
To fix this, it’s probably best to contact a specialist for safe removal. Once you get the film applied correctly, your car should feel cooler and more comfortable.
